Installing Sequel and running Viewpoint requires access through various servers to run certain activities and processes.
It is important to review your rules in PowerTech Network Security and confirm there is nothing defined that will block the network access Viewpoint requires. The tables below identify the servers that are used for installing and running Viewpoint. These servers and functions must be allowed for each user or group profile that will be running Viewpoint.
Note: If you don’t have rules rejecting traffic for any of these servers there is no need to specifically allow access for the user profile. Access can be allowed at the server or server/function level and the rule authority should be set to *OS400.
Viewpoint requires access to the following servers/functions for proper operation:
| Server | Function | ||
|---|---|---|---|
| *DATAQSRV | QRYDTQATR | ||
| RCVDTQMSG | |||
| SNDDTQMSG | |||
| CNLPNDRCV | |||
| *DDM | OPEN | ||
| EXTRACT | |||
| *FILESRV | ALCSTRMCNV | ||
| LSTSTRMATR | |||
| *RMTSRV | RMTCMD | ||
| DSTPGMCALL | |||
| *SIGNON | RETRIEVE | ||
| *SQL | INIT | ||
| *SQLSRV | EXECUTEIMM | ||
| PRPDESCRB | |||
| OPEN |
The Sequel installation wizard (via FTP) requires access to the following servers/functions for proper operation:
| Server | Function | ||
|---|---|---|---|
| *FTPSIGNON | SIGNON | ||
| *FTPSERVER | CREATELIB | ||
| LISTFILES | |||
| RMTCMD | |||
| RECVFILE | |||
| SENDFILE |
For information on adding or changing access rules in Network Security contact a PowerTech Technical Support team member by email at [email protected], or by calling +1 952-933-0609 in the U.S. Outside the U.S., call +44 (0) 870 120 3148.
Still have questions? We can help. Submit a case to Technical Support.
