Posted Thu, 01 Jan 2015 06:00:00 GMT by Portal Admin

From time to time, we will ask you to retrieve SNMPwalk information from a device on your network. InterMapper makes it easy to do this:

- Right-click the device and choose SNMPwalk... (Note: the device must be using an SNMP probe type...)



- Enter the starting OID that you wish to retrieve. It might be something like "ifTable" if you want to see the MIB-2 interface table. To retrieve all the data that the device will supply, enter "1.3.6". In general, you should not check the "Limit by number of rows..." box.



- Click OK. A new window will open, and begin to fill with all the SNMPwalk information. Let it complete - it may take a while. It will look like this:



- Copy all the cells from that window, paste them into a spreadsheet, and send them to [email protected].

Note: The procedure described above is easy to do, but the process described on this Knowledge Base page returns data that's easier to process. Obtaining Detailed SNMP Walk Information

You must be signed in to post in this forum.