Q: Equallogic SAN units.
According to the header of the probe
|NOTE ABOUT SAN ID: To get your individual member SAN ID:
snmpwalk -v1 -c public <SAN_IP> 184.108.40.206.4.1.127220.127.116.11.1.9.1
That should return the SAN's Member Name, but more importantly it will show you the 8-digit "SAN ID" that you need to enter in the Set Probe parameters window.
The rest of the probe depends on it...
running the snmpwalk command returns the following:
~$ snmpwalk -v1 -c dell 192.168.250.51 18.104.22.168.4.1.12722.214.171.124.1.9.1
SNMPv2-SMI::enterprises.127126.96.36.199.188.8.131.528492667 = STRING: "san1"
SNMPv2-SMI::enterprises.127184.108.40.206.220.127.116.114665748 = STRING: "san2"
Which "8 digit" number am I supposed to use for the SAN ID?
A: The "8 digit number" appears to be the index/row number for each of these SANs. I suspect that your equipment has nine-digit row numbers (748492667 & 1864665748 for san1 & san2, respectively).