Requirements

  • V5R3 or higher.

  • Compatible with i5/OS V5R3 and V5R4, and IBM i 6.1, 7.1, and 7.2.

  • Ability to sign on to the IBM i as QSECOFR or equivalent (*SECADM, *ALLOBJ, and authority to RSTLICPGM command).

  • A license key is required. Be sure you have a product license before starting this procedure.

Instructions

  1. Create a temporary directory on your PC: C:\TEMP.

  2. Download the Stand Guard Network Security 3.11 application to the temporary directory. Current users can access the download from the My Downloads page. If you're a new user, you should have received an email message containing the download link. If you don't have it, contact your Bytware Regional Manager.

  3. Unzip the file to the C:\TEMP directory.

  4. Open a DOS window (Click Start > Run, type COMMAND, and press Enter). Then, type the following commands:

    1. FTP, then press Enter.

    2. OPEN, then press Enter.

    3. Type your IBM i system name or IP address, then press Enter.

    4. If necessary, type your username and password, then press Enter.

    5. QUOTE RCMD CRTSAVF QGPL/SGNS311, then press Enter.

    6. BIN, then press Enter.

    7. PUT C:\TEMP\SGNS311 QGPL/SGNS311, then press Enter.

    8. BYE, then press Enter.

  5. Sign on to the IBM i with *ALLOBJ and *SECADM authority and run the following commands:

    RSTOBJ OBJ(*ALL) SAVLIB(QTEMP) DEV(*SAVF) SAVF(QGPL/SGNS311)

    For new installs: QTEMP/SGINSTALL

    For upgrades from 3.x: QTEMP/SGINSTALL REPLACERLS(VxRxMx) RESTART(*YES)

    (Confirm the version you're replacing by running the command DSPSFWRSC.)

  6. To go to the main Stand Guard menu, type SGMENU on a command line and press Enter.

 


Still have questions? We can help. Submit a case to Technical Support.

Last Modified On: January 10, 2018