PTF for Running Stand Guard Recycle Bin with Stand Guard Network Security

Description

This PTF allows Stand Guard Network Security and Stand Guard Recycle Bin to function properly on the same IBM i.

Requirements

• Stand Guard Network Security is currently installed.

• Ability to sign on to the IBM i as QSECOFR or equivalent (*SECADM, *ALLOBJ, and authority to the ALWOBJDIF parameter on the RSTOBJ command).

Note: TCP/IP server jobs and/or subsystems will NOT need to be restarted. PTF installation may occur at any time.

Instructions

1. Create a temporary directory on your PC: C:\TEMP.

2. Download the Stand Guard PTF file, SAVF0831.zip, to the temporary directory. Current users can access the download from the My Downloads page. If you're a new user, you should have received an email message containing the download link. If you don't have it, contact your Bytware Regional Manager.

3. Unzip the file to the C:\TEMP directory.

4. Open a DOS window (Click Start > Run, type COMMAND, and press Enter). Then, type the following commands:

   1. FTP, then press Enter.

   2. OPEN, then press Enter.

   3. Type your IBM i system name or IP address, then press Enter.

   4. If necessary, type your username and password, then press Enter.

   5. QUOTE RCMD CRTSAVF QGPL/SAVF0831, then press Enter.

   6. BIN, then press Enter.

   7. PUT C:\TEMP\SAVF0831 QGPL/SAVF0831, then press Enter.

   8. BYE, then press Enter.

5. Sign on to the IBM i with *ALLOBJ and *SECADM authority and run the following commands:

   RSTOBJ OBJ(*ALL) SAVLIB(XP20GEN) DEV(*SAVF) OBJTYPE(*ALL) SAVF(QGPL/SAVF0831) MBROPT(*ALL) ALWOBJDIF(*ALL) RSTLIB(STANDGUARD)

   You should receive the following messages: "1 security or data format changes occurred," and "1 objects restored. 0 not restored to library STANDGUARD."