Apply a licence to our IBM I software – Expert Level

GO HALCYON > 42 > 1

or

WRKAUTCDE

then

F6 to add a new code.

You should remove old codes, by placing a “4” against an expired code.

Apply a licence to our IBM I software – Intermediate level

GO HALCYON

Choose option 42 (Configuration menu)

Choose option 1 (Work with authorisation codes)

or

Use the command: WRKAUTCDE

then

Press F6 to add a new code. Paste the code in and press <Enter> to save the code

You should remove old codes, by placing a “4” against an expired code.

You can see what is secured by a code by placing a “5” against an individual code.

Systems may have multiple codes installed.

Apply a licence to our IBM I software – Basic level

Select option 42 (Configuration menu)



Select 1 (Work with Authorisation Codes)

Press F6 to add a new code



Paste or type the code in

When you press <Enter> to enter the code, it will show you what is secured by that code, thus:

You must press <Enter> again to save the code.


Still have questions? We can help. Submit a case to Technical Support.

Last Modified On: May 29, 2020