In this example the following values are used, and you should replace them with your known values
| Our Example | Your Example | |
| IBMi Name | IBMi | |
| IBMi Local IP Address | 168.98.0.6 | |
| IBMi NAT IP Address | 98.54.17.8 | |
| Enterprise Console Name | ENTCON | |
| Enterprise Console IP Address | 172.18.11.62 | |
| Enterprise Console NAT IP Address | 92.72.225.18 |
Define the IBMi in Device Manager on the PC.
Click Advanced and then Connection, and define alternative IP address.
Define the Enterprise Console server in Device Manager on the PC
Locate file NMService.alt in directory C:\Program Files (x86)\Halcyon\Network Manager.
Apply the following change.
RESTART the Halcyon Network Manager Service on the Enterprise Console.
Define the IBMi, and the Enterprise Console, in Remote Locations on the IBMi.
GO HALCYON > 42 > 6 > F6
or
GO HALCYON > WRKIPAMAP > F6
Add the NAT address as the Primary IP address
Then the local IP address as the “Alternate”
Still have questions? We can help. Submit a case to Technical Support.
