Problem

Message:     3200 - RPTNUM SPLF(HW400A05) SPLNBR(*LAST)
 
RTNSPLF(&SPLFNAME) RTNJOBNAME(&JOBNAME) RTNJOBUSER(&JOBUSER)
RTNJOBNUM(&JOBNBR) RTNSPLNUM(&SPLNBR)
 
CPD0784 Diagnostic  30  08/26/04  05:09:01.606032  QCAFLD QSYS 0C65 HWACA908 HWPRDOBJ 0028
 
Message . . . . :   Variable        N 0011 B2902QSY for parameter RTNSPLNUM
   must be *CHAR, minimum length 6.
Cause . . . . . :   Variable        N 0011 B2902QSY for parameter RTNSPLNUM
   must be TYPE(*CHAR) with a minimum length of LEN(6). Recovery  . . . :
   Change the length or type of variable, and then try the CRTCLPGM command
   again.
 
CPF0001  Escape  30  08/26/04  05:09:01.606104  QCADRV QSYS 0583 HWACA908 HWPRDOBJ 0028
 
Message . . . . :   Error found on RPTNUM command.
Cause . . . . . :   The system detected errors in the command. Recovery  . . .
   :   See the previously listed messages in the job log. Correct the errors
   and then try the command again.  *N instead of a command name means that the
   name had not been determined before the error was found.

Solution

In V5R1 of the OS/400 operating system, the spool file number has been extended to be 6 digits. Upgrade to the latest version of the Report Splitter library if you have V5R1 or above of the OS/400 operating system.

Still have questions? We can help. Submit a case to Technical Support.

Last Modified On: December 10, 2016