Before You Install

  1. Confirm that the OS/400 is version V5R1 or above.
  2. Run WRKLIB RJSDOM to confirm that you do not already have a copy of the RJSDOM library on your iSeries. If it returns no results, continue to step 3. If it does return results, RJSDOM has been installed on your iSeries in the past; ask your iSeries administrator whether to upgrade or clear the library and reinstall.
  3. Make sure that:
    1. FTP is running on the iSeries LPAR where you are installing RJSDOM.
    2. Your account has the required system credentials.
      Note: If your account does not have the required system credentials, use QSECOFR or another account with *ALLOBJ special authority.
  4. On the FTP server, make sure that NAMEFMT is set to 1, not 0.
    Note: NAMEFMT is set to 1 on most FTP servers.
  5. If you are using FTP exit programs, create an exception or temporarily disable them during this installation.
  6. Make sure that your RJSDOM license matches the iSeries serial, model, and LPAR numbers. If you do not have a license or do not know if your license matches, view our licensing help or contact RJS Technical Support.
  7. On a Windows system on the same network as the iSeries, download the zipped RJSDOM save file.
  8. Unzip RJSDOM_1.60.ZIP to C:\.
  9. Run CRTSAVF FILE(QGPL/RJSDOM) to create a temporary file on the iSeries to upload RJSDOM.LIB to.

Installing

  1. Log in to the iSeries LPAR you are installing RJSDOM on:
    1. Bring up a command line:
      1. On older versions of Windows, click Start > Run, type cmd, and click OK.
      2. On newer versions of Windows, click Start, type cmd, and press Enter.
        A Windows Console window opens.
    2. Type ftp 1.1.1.1, where 1.1.1.1 is the IP address of the iSeries LPAR you are installing RJSDOM on.
    3. Type the user name and password of the account you chose in Before You Install 3.2.
      Note: If you cannot log in, most likely either your account has a security restriction on the iSeries or you are using FTP exit programs. In both cases, contact your iSeries administrator to rectify.
  2. Run the following commands:

    binary

    quote site namefmt 1

    send C:\RJSDOM.LIB /QSYS.LIB/QGPL.LIB/RJSDOM.FILE
  3. Use the quit command to exit FTP and close the Windows Console window.
    Note: You can now delete RJSDOM.LIB from C:\.
  4. Restore RJSDOM from the uploaded file to its own library:
    1. Log in to the iSeries.
    2. On a command line, run the following command:

      RSTLIB SAVLIB(RJSDOM) DEV(*SAVF) SAVF(QGPL/RJSDOM)

Applying a License

  1. On an iSeries command line, run CALL QCMD for a longer command line.
  2. Copy the RJSDOM/PRDSEC command from the licensing email from RJS Software. See the sample licensing email below:
    --------------------------------------------------
    AS/400-iSeries-IBM i Access Codes

    S/N:1000000 M#:M4A LPAR:1 Exp:00/00/0000

    *INSTRUCTIONS* - Copy and paste the access code to a 5250 command line and press Enter to apply the code.
    CALL QCMD from the command line to show a multi-line command line.

    Product Name: Domino Report Server/400
    RJSDOM/PRDSEC DTAARA(RJSDOM) DTALIB(RJSDOM) SECURITY('1710A0E000003D0D200DE0D0810110A0110001901080100000')

    For assistance contact RJS Technical Support
    Email: support.rjs@helpsystems.com
    Tel: (952)736-5800
    Fax: (952)736-5801
    --------------------------------------------------
  3. Paste the RJSDOM/PRDSEC command in the iSeries command line.
  4. Press Enter.

    Domino Report Server/400 is now installed and licensed on the iSeries.

Verifying an Existing License

  1. On an iSeries command line, run the RJSDOM/PRDINFO command to view your OS/400 level and your iSeries series, model and LPAR numbers. They will display at the bottom of your screen, in the format: OS/400 Level: ___ Model: ___ Serial#: _______ LPAR: _.Copy these values into an email.
  2. On an iSeries command line, run DSPDTAARA RJSDOM/RJSDOM to display your current license. Copy the license value to your email, as well.
  3. Send the email to RJS Technical Support at support.rjs@helpsystems.com, with the above information, your name, and the name of your company.

Requesting a Demo/Disaster Recovery/Temporary License

You can get temporary licenses, free of charge, for demo and disaster recovery purposes, or by arrangement.

  1. Get the serial, model and LPAR numbers for the system you want to license.
    1. If you've already installed RJSDOM, you can use the instructions at Verifying an Existing License, Step 1, above.
    2. Otherwise:
      1. If you are running OS/400 V5R3 or above, open the Electronic Service Agent menu (GO SERVICE) and take option 6 (Display service agent registration information). Your serial, model and LPAR information will display.
      2. If you are running OS/400 V5R1 or V5R2, run the STRSST command and login to get to the System Service Tools (SST) menu. Take option 5 (Work with system partitions) to view your LPAR number (referred to here as partition identifier).
        Alternately, you can use the system command DSPSYSVAL QSRLNBR to obtain your serial number, and DSPSYSVAL QMODEL to get your model number. If you do not know your LPAR number, you may need to call IBM and get it by providing your serial number.

Transferring Licenses

Since RJSDOM is licensed per LPAR, moving the library to another LPAR, even on the same hardware, requires a modified license. If you need to keep the old LPAR in production while the new LPAR is tested, request a temporary license using the instructions above for the new LPAR. Once you have removed RJSDOM from the old LPAR, use these instructions to obtain a permanent license for your new LPAR.

  1. Getthe serial, model and LPAR numbers for the system you want to license.
    1. If you've already installed RJSDOM, you can use the instructions at Verifying an Existing License, Step 1, above.
    2. Otherwise:
      1. If you are running OS/400 V5R3 or above, open the Electronic Service Agent menu (GO SERVICE) and take option 6 (Display service agent registration information). Your serial, model and LPAR information will display.
      2. If you are running OS/400 V5R1 or V5R2, run the STRSST command and login to get to the System Service Tools (SST) menu. Take option 5 (Work with system partitions) to view your LPAR number (referred to here as partition identifier).
        Alternately, you can use the system command DSPSYSVAL QSRLNBR to obtain your serial number, and DSPSYSVAL QMODEL to get your model number. If you do not know your LPAR number, you may need to call IBM and get it by providing your serial number.
  2. Copy the following template into a blank document:

    M DD, YYYY
    RJS Software Systems, Inc.
    PO Box 1408 Burnsville, MN 55337
    To Whom It May Concern:
    YOUR COMPANY NAME has recently removed all software provided by RJS Software Systems from the iSeries partition with Serial Number __________, Model Number ___and Partition Number _. This software will no longer be run on this iSeries. The software will be installed on the iSeries partition with Serial Number __________, Model Number ___and Partition Number _ and executed on this partition.
    Sincerely,
    (SIGNATURE)
    (YOUR NAME)
    (YOUR COMPANY NAME)
  3. Replace the underlined sections with the appropriate information.
  4. Print on company letterhead, and sign at the bottom.
  5. Email a PDF or TIFF copy to support.rjs@helpsystems.com, or fax a copy to (952) 736-5801. You should receive a response by close of the soonest business day.
    Note: Change out requests will be rejected if they are:
    • Not signed
    • Not on company letterhead
    • Not in TIFF or PDF format (if emailed)
    • Missing/incomplete/incorrect serial/model/LPAR information

Getting Started

 


Still have questions? We can help. Submit a case to Technical Support.

Last Modified On: February 20, 2019