Set up Robot Console to monitor the message queue MIMIXQGPL/MIMIX. Message IDs that start LVE* are errors. You need to determine what should happen with these errors. Create a message set for them.
Set up a resource monitor for the following:
Resource Name | Resource Type |
MIMIXSBS | Subsystem |
PORT50410 | Job |
You also can create a program that uses the command MIMIX/RTVDGSTS. This command retrieves the status of a data group. You can then attach that command to a user-defined status similar to the following example:
Next, create a table of some of the message IDs you may want to monitor and treat the same way. They are located in message file LVMSGF in library MIMIX.
LVED00A | The Dynamic object processing job failed. |
LVE0142 | Object send process for data group &1 ending abnormally. |
LVE0143 | Remote journal connection from &2/&1 to &4/&3 not found. |
LVE0109 | A communications error occurred with reason code &5. |
LVE0190 | Cannot allocate shared resource &1. |
LVE0191 | Cannot allocate shared resource &1. |
LVE0192 | Cannot allocate shared resource &1. |
LVE0193 | Cannot allocate shared resource &1. |
LVE0194 | Cannot allocate shared resource &1. |
LVE0195 | Cannot allocate shared resource &1. |
LVE3E95 | Local system name could not be retrieved. |
LVE3AAE | Journal receiver library value not valid for remote journal environment. |
LVE3AB4 | Journal receiver prefix value cannot be changed for target remote journal environment. |
LVE3AB5 | Threshold message queue value does not match the existing journal environment. |
LVE3AB6 | Threshold message queue library value does not match the existing journal environment. |
LVE3AB7 | Journal receiver library value not valid for remote journal environment. |
LVE3ADD | Journal manager for system &1 is not active. |
LVE3ADE | Attempt to change journal &5/&4 failed with reason code &3. |
LVE3ADF | Change of journal receivers for journal &5/&4 failed with reason code &3. |
LVE3AD5 | Resubmit of journal manager for system &1 failed. |
LVE3AE2 | Sequence number reset for journal &5/&4 failed. |
LVE3AE3 | Journal manager for system &1 has terminated abnormally. |
LVE3AE4 | Error &3 starting journal manager for system &1. |
LVE3AE5 | Error &2 ending journal manager for system &1. |
LVE3AF8 | Switch request failed with reason code of &3. |
LVE3A0E | Unable to start send/receive and/or apply for data group &2 on system &1. |
LVE3A11 | Unable to retrieve last processed journal transaction information. |
LVE3A82 | Network system &1 is not valid for manager request from network system &2. |
LVE3C2B | Object send is not active for data group &1 &2 &3. |
LVE3C29 | Database send is not active for data group &1 &2 &3. |
LVE3C32 | Pending activity entries exist for data group &1. |
LVE3C34 | Failed activity entries exist for data group &1 |
LVE3D2C | Transfer definition &1 does not define a valid remote database (RDB) entry. |
LVE3D5E | User journal (database) replication is not active. |
LVE3D6D | User journal (database) replication is not active. |
LVE3D60 | &1 could not determine status for data group &2 &3 &4. |
LVE30F4 | Journaling started on system &1 for &2 objects. &3 objects had errors. |
LVE30F6 | Journaling not started for &1 in library &2, type &3. |
LVE301D | Object packaging failed for &8. |
LVE301E | Object packaging failed for &8. |
LVE3019 | Error processing &1 outfile &5 for data group &2. |
LVE305C | End of database send process for data group &1 &2 &3 failed. |
LVE305D | End of object send process for data group &1 &2 &3 failed. |
LVE3062 | Error &4 starting database send for data group &1 &2 &3. |
LVE3063 | Error &4 starting object send for data group &1 &2 &3. |
LVE31BA | Journal definition &1 &2 not the source of a remote journal link with target system &3. |
LVE31B9 | Journal definition &1 &2 not the target of a remote journal link. |
LVE31C4 | ERROR * - Database apply failed for IFS object. |
LVE313B | Journal definition name &3 reserved. |
LVE33A0 | Not able to rename system definition &1. |
LVE33D7 | STRJRNOBJE failed. Journaling requests were not processed for any objects. |
LVE33EA | ENDJRNOBJE failed. Journaling requests were not processed for any objects. |
LVE33EB | VFYJRNOBJE failed. Journaling requests were not processed for any objects. |
LVE33EC | STRJRNIFSE processed &2 local and &7 remote requests with errors. |
LVE33ED | ENDJRNIFSE processed &2 local and &7 remote requests with errors. |
LVE33EE | VFYJRNIFSE processed &2 local and &7 remote requests with errors. |
LVE33EF | STRJRNIFSE failed. Journaling requests were not processed for any objects. |
LVE33E8 | ENDJRNOBJE processed &2 local and &7 remote requests with errors. |
LVE33E9 | VFYJRNOBJE processed &2 local and &7 remote requests with errors. |
LVE33FE | STRJRNIFSE processed &2 local and &7 remote requests with warnings. |
LVE33FF | VFYJRNIFSE processed &2 local and &7 remote requests with warnings. |
LVE33F0 | ENDJRNIFSE failed. Journaling requests were not processed for any objects. |
LVE33F1 | VFYJRNIFSE failed. Journaling requests were not processed for any objects. |
LVE3411 | Data group &1 is not configured for remote journaling. |
LVE3415 | Keyed replication is configured in data group &1. |
LVE37CF | Error occurred attempting to delete journal receiver &1. |
LVE37D4 | Threshold message queue library &1 exists in a different ASP device. |
LVE37D5 | Journal environment &1 &2 not built, reason code is &3. |
LVE37D7 | Journal library &1 exists in a different ASP device. |
LVE37D8 | Journal receiver library &1 exists in a different ASP device. |
LVE3795 | RCRMQMOBJ did not recover all the requested queues |
LVE4046 | Exceeded maximum number of restart attempts for monitor &1. |
LVE3D76 | Data group &1 &2 &3 detected a database apply backlog. |
LVE305C | End of database send process for data group &1 &2 &3 failed. |
LVE305E | End of database apply for data group &1 &2 &3 failed. |
LVE3062 | Error &4 starting database send for data group &1 &2 &3. |
LVE31C4 | ERROR * - Database apply failed for IFS object. |
LVE3328 | OUTFILE parameter required with OUTPUT(*OUTFILE). |
LVE3E0B | The CMPIFSA failed due to errors. |
LVE3E07 | &1 IFS objects compared. &2 IFS objects different, &5 of which were active. |
LVE3F07 | Specify a name for IFS object when Object type is &2. |
LVE30FF | New directory created, not known to MIMIX. |
LVE31C5 | Data group IFS tracking entry not removed. |
LVE33FF | VFYJRNIFSE processed &2 local and &7 remote requests with warnings. |
LVE33F0 | ENDJRNIFSE failed. Journaling requests were not processed for any objects. |
LVE33F1 | VFYJRNIFSE failed. Journaling requests were not processed for any objects. |
LVE33F2 | Object in use by job &1 &2 &3. |
LVE338A | &1 DGFEs compared. &2 DGFEs were different but being added, changed, or removed. |
LVE3390 | Error &1 detected. File &5 in library &6 held. |
LVE3AAB | CMPDGFE attribute compare of file &5/&4 failed. |
LVE3AAC | CMPDGFE data compare of file &5/&4 member &6 failed. |
LVE3D6C | CMPFILDTA was ended for data group &8 &9 &10. |
LVEQ901 | Error in step at sequence number &3 in procedure &2. (R C I) |
LVQE902 | Procedure &2 for application group &1 requires response. (G C) |
LVQ0002 | Utility power not yet restored. Continue power down? (Y N) |
LVQ0003 | Diagnostic point &1 for &4/&3/&2 |
LVQ1001 | Warning - &1 will also be deleted. Specify G (Go) to delete it or C (Cancel) to cancel. (G C) |
LVQ3001 | &4 job waited &8 minutes for &6 job to end. (I C) |
LVQ3002 | &4 second WAIT exceeded while ending data groups. (Q R E) |
LVQ3004 | ATTENTION: Damage may occur. Use F1 (Help) before replying. (C G) |
LVQ3005 | ATTENTION: Damage may occur. Use F1 (Help) before replying. (C G) |
LVQ3006 | &4 second WAIT exceeded while ending data groups. (Q R E) |
LVQ3007 | &2 second WAIT exceeded while ending active recoveries. (Q R) |
LVQ5001 | (G C) CPYACTF requires an exclusive lock on file &1 in library &2 in order to complete the copy process. |
LVQ5002 | (G C) CPYACTF is unable to allocate all objects needed to cleanup temporary journal &1. |
LVQ5003 | (G C) RGZACTF requires an exclusive lock on file &1 in library &2 in order to complete the reorganize process. |
Still have questions? We can help. Submit a case to Technical Support.