Use the following information to set up mirroring of your Robot products.
If you are restoring any Robot product libraries, RBTSYSLIB must be the first library restored to the target system. Then, call RSL062 to create the required user profiles.
When mirroring Robot products, the product cannot be active on the target system.
| Product | Product Name |
|---|---|
|
Robot Schedule |
See "Mirroring Robot Schedule." |
|
Robot Console |
Console |
|
Robot Monitor 8 |
Monitor |
|
Robot Reports |
Reports |
|
Robot Save |
RobotSave |
|
Robot UPS |
RobotUPS |
The following table provides detailed information for mirroring each Robot product.
Notes:
You cannot use mirroring as a method of performing a silent update of a product. You must perform a product update or conversion on both the production (source) and backup (target) systems.
You should perform a complete install, or at least a full save and restore, of the appropriate product library to the backup/target system before you start mirroring.
Never mirror library HSLOADMGR and HSLOADMGRW.
Never mirror user profiles - RBTUSER, RBTADMIN, or RBTNETPT.
| Product | Product Library | Product Mirroring Allowed | Object Name | Object Type | Omit From Mirroring | Object Type | Comments |
|---|---|---|---|---|---|---|---|
| Robot Alert | RBTALRLIB | Yes | *ALL | *DTAARA | |||
| *ALL | *FILE | ||||||
| ARSEC | *DTAARA | ||||||
| RBAC0* | *DTAARA | ||||||
| RBATM* | *DTAARA | ||||||
| RBA999 | *USRSPC | The user space RBA999 should be mirrored if at R05M57 and using the multiple-entry license screen. | |||||
| Robot Autotune |
ATLIB | No | |||||
| Robot Client | RBTRCLLIB | Yes | RCLAA | *FILE | You must re-register clients on the target system. | ||
| RCLCD | *FILE | ||||||
| RCLCI | *FILE | ||||||
| RCLRU | *FILE | ||||||
| RCLTA | *FILE | ||||||
| RCLTK | *FILE | ||||||
| RCLAO | *FILE | ||||||
| RCLCC | *FILE | ||||||
| RCLHP | *FILE | ||||||
| RCLCS | *FILE | ||||||
| *ALL | *MSGQ | ||||||
| RCLSECCLT | *DTAARA | R05M04 or lower. | |||||
| RCL030DA | |||||||
| RCL800U | *USRSPC | R05M05 or higher. Holds the product license code. | |||||
| Robot Console | RBTCONLIB | Yes | *ALL | *FILE | |||
| *ALL | *PGM | ||||||
| *ALL | *DTAQ | ||||||
| *ALL | *USRSPC | ||||||
| *ALL | *MSGQ | ||||||
| *ALL | *DTAARA | ||||||
| RCSEC | *DTAARA | R03M38 or lower. | |||||
| RBC801U | *USRSPC | The user space RBC801U should be mirrored if at R05M23 and using the multiple-entry license screen. | |||||
| RBCMRGLIB | Optional | Used to export jobs, message sets and report sets. NOTE: If you have Robot Network, you can use packets. | |||||
| Robot Corral | RBTROLLIB | Yes | *ALL | *FILE | |||
| Robot CPA | RBTCPALIB | No | |||||
| Easy View | EZVIEW | Yes | *ALL | *FILE | |||
| EVPDFTS | *FILE | ||||||
| EZSEC | *DTAARA | R07M07 or lower. | |||||
| EV999 | *USRSPC | The user space EV999 should be mirrored if at R08M25 and using the multiple-entry license screen. | |||||
| Robot LPAR | RBTLPRLIB | No | |||||
| Robot Monitor 8 | RBTMTRLIB | No | |||||
| Robot Network | RBTNETLIB | No | If you are mirroring the IFS, omit the following directory and all its subdirectories: /Help Systems/Robot Network. |
||||
| RBTNETNODE | No | ||||||
| Robot Replay | See "Using Robot Replay in a High Availability Environment." | ||||||
| Robot Reports | RBTREPLIB | Yes | *ALL | *DTAARA | |||
| *ALL | *USRSPC | ||||||
| *ALL | *USRIDX | ||||||
| *ALL | PF | ||||||
| *ALL | LF | ||||||
| *ALL | *PGM | ||||||
| Omit all programs that start with REP*. | |||||||
| REP030DA | *DTAARA | REP030DA is permanently locked by the REPQWATCH job. | |||||
| REP123DA | *DTAARA | These data areas may be locked by Robot Reports jobs. | |||||
| RPSEC | *DTAARA | R06M37 or lower. | |||||
| REP999 | *USRSPC | The user space REP999 should be mirrored if at R07M59 and using the multiple-entry license screen. | |||||
| REPSPLDTQ | *DTAQ | NOTE: This should be on the target system, but should not be mirrored. | |||||
| REPSHTRMLB | Yes | *ALL | *ALL | ||||
| REPMRGLIB | Optional | Used to export jobs, message sets and report sets. NOTE: If you have Robot Network, you can use packets. | |||||
| REPLNTRMLB | No | ||||||
| Robot Save | RBSPGMLIB | No | ; | ||||
| RBSDTALIB | No | ||||||
| RBSTMPLIB | No | ||||||
| RBSPCBLIB | No | ||||||
| Robot Schedule | See "Mirroring Robot Schedule." | ||||||
| Robot Schedule Enterprise | See "Mirroring Robot Schedule." | ||||||
| Robot Schedule for EnterpriseOne |
See "Mirroring Robot Schedule." | ||||||
| Robot Space | RBTSPCLIB | No | |||||
| RBTSYSLIB | RBTSYSLIB | No | |||||
| Robot Transform | RBTTRNLIB | Yes | *ALL | PF | |||
| *ALL | LF | ||||||
| *ALL | *DTAARA | ||||||
| TRNCOMP | *DTAARA | ||||||
| TRN6100DA | *DTAARA | ||||||
| TRN6200DA | *DTAARA | ||||||
| TRN804D | *DTAARA | ||||||
| TRN807SPC | *USRSPC | If you have both TRN807SPC and TRN807SPC2, you should not mirror either of them. | |||||
| TRN807SPC2 | *USRSPC | ||||||
| TRN999 | *USRSPC | Holds the product license code. | |||||
| Robot Trapper | RBTTRPLIB | Yes | *ALL | *ALL | |||
| TRP999 | *USRSPC | The user space TRP999 should be mirrored if at R01M23 and using the multiple-entry license screen. | |||||
| Robot UPS | RBTUPSLIB | No | |||||
Still have questions? We can help. Submit a case to Technical Support.
